Friday, September 2, 2016

Lamp Brackets

With all the pipework now sorted I think I'm down to the last two details I need to finish before I can think about painting; lamp brackets and the smokebox door. The smokebox door will be covered in another post but today I've fabricated the lamp brackets and fitted the rear one.


The original cab moulding had empty lamp brackets at both the botom corners of the rear sheet, and a lamp in the middle just below the windows. I wasn't happy with any of these and so they were all removed quite early on. Having looked at old photos I've settled on a single lamp bracket on the rear of the cab, and as you can see have used a whitemetal casting for the lamp itself (this is actually a 3mm scale casting from 3mm Scale Model Railways). Of course the loco would usualy only carry a single lamp positioned at the front or rear depending on which way it was travelling, so I've made the lamp removable so in theory it can move between the rear and front lamp brackets.


Here you can see the fitted bracket, along with the lamp (modified with a locating loop), and the tool I made to form the brackets. The tool is simply a piece of brass with a slot in it, but it allows you to easily bend a strip of brass for the brackets. Not much to show I know but I think it's a nice feature. I might find I glue the lamp on because it's more hassle than it's worth but for now having the ability to remove it should be a nice touch.

2 comments:

  1. A removable lamp would be good when taking phots as well, if only to see if anyone notices that its moved...

    ReplyDelete
    Replies
    1. I did wonder about not mentioning it at all to then see if anyone noticed in photos later.

      Delete